This document explains how to fix Microsoft Outlook Send Receive Error.  The error generally occurs while performing action like sending or receiving emails, configuring emails etc.

This solutions applies for following version of Microsoft Outlook:

  • Outlook 20016
  • Outlook 365
  • Outlook 2013
  • Outlook 2007
  • Outlook 2010
  • Microsoft Office (2013/365/2016)
Outlook Send Receive Error Code Log
Avg. Time to Resolve Issue   40 mins
Difficulty Hard
Log Name: Microsoft Outlook <version> 7.75
Source: DNS Error
Also known as: Outlook fehler code , foutcode , fejlkode , code d’erreur , codice di errore , feil kode , cod de eroare , código de error
Operating System
  • Windows 7
  • Windows 8
  • Windows 10
Level: Administrator
User: <Outlook username>
Description:
  • Faulting Application Name: Microsoft Outlook <Application name>, version: 5.2.2322.73306, time stamp: 0×95289288
  • Faulting module name: Outlook  error.dll, version: 4.2.3912.45473
  • Exception code: 0xb02g953c
  • Fault offset: 0xd01f800d
  • Faulting process ID: 0×432
  • Faulting application start time: 0x16efdc3d67781729
  • Faulting application path: ~<userpath>
  • Faulting module path: ~C:\Program Files (x86)\Microsoft Outlook\<appname>
  • Report ID: e3a25e44-9922-27f7-6129-4663cef4b959
[/su_tab] [/su_tabs]

Cause of Outlook Send Receive Error Code

  • DNS Conflict
  • Junk files location contains active threat

How to Resolve Outlook Send Receive Error Code

Step 1: Check Proxy Settings
1. Hold Win Key + R. Run Dialogue Box will open up.
2. Enter CMD and Click OK.
Office Resolve Error Proxy Check 3. In command Prompt Copy following commands (Simply select the command and press ctrl+c and press ctrl+v in command prompt)

 netsh winhttp import proxy source=ie 

Check Proxy Setting

Note: You will need Administrator Access to Run the above command. Simply Right Click on cmd button and select “Run as Administrator

If you get the message “Direct Access (no proxy server)“, continue to the next step otherwise disable proxy from Network Settings.

 You can contact our 24×7 Live support for any help during the whole process. 

Step 2: Verify Windows Firewall Settings

1. Press Win Key + R. Run Dialogue Box will open up.
2. Type Firewall.cpl and Click OK.

3. Click on “Turn Windows Firewall On or Off
Turn Windows Firewall on or off4. In Private network Setting, select “Turn off Windows firewall (not recommended)
5. Do the same for Public Network Setting.
Disable Windows Firewall6. Press OK.
Note: After the issue is resolved you must turn the Windows Firewall on.

In most cases Outlook Send Receive Error should be resolved by following above steps. If however the issue still persists it means there is some critical issue with your system which needs to be fixed manually and is recommended to be done by an experienced Computer Technician.

You can chat one-on-one with one of our Outlook Support Representative 24/7 by clicking on the Chat button.

Rate this Solution
Did this article help you?
48   3      
Last Updated: 13/02/2016
Solution ID: 994821

  • 0x800CCC79 Outlook Error Code – How to Fix Steps
  • Outlook 2013 closes after opening – How to Fix Steps
  • Outlook Cannot Connect To Outgoing Smtp Server – How to Fix Steps
  • 0x80040201 Outlook Error Code – How to Fix Steps
  • 0x85050041 Outlook Error Code – How to Fix Steps
  • 0x80070002 Outlook Error Code – How to Fix Steps
  • Could Not Complete The Operation Because The Service Provider Does Not Support It – How to Fix Steps
  • Outlook Crash Ntdll.dll 0xc0000374 – How to Fix Steps
  • Either There Is No Default Mail Client Or The Current Mail Client Cannot Fulfill The Messaging Request. Please Run Microsoft Outlook And Set It As The Default Mail Client – How to Fix Steps
  • 0x800c8101 Outlook Error Code – How to Fix Steps
  •